Ga door naar hoofdinhoud
Word lid van de reparatiegemeenschap - Account aanmaken

Leica CS20 Screen Replacement

  1. Leica CS20 Screen Replacement, Oops..: stap 1, afbeelding 1 van 1
    • I did it again!

  2. Leica CS20 Screen Replacement, Order a new replacement screen: stap 2, afbeelding 1 van 1
    • I am tired to pay 1200 EUR to Leica service center, so I ordered a new replacement screent here: www.xsurveying.com/product/new-leica-cs20-digitizer-screen-replacement Price with delivery was around 185 EUR

  3. Leica CS20 Screen Replacement, New touchscreen: stap 3, afbeelding 1 van 1
    • The package arrived in two weeks. It contained a well packed touchscreen

  4. Leica CS20 Screen Replacement, Prepare a clean area: stap 4, afbeelding 1 van 1
    • Place controller on a desk

  5. Leica CS20 Screen Replacement, Unscrew all the bolts: stap 5, afbeelding 1 van 1
    • …and unscrew all the bolts

  6. Leica CS20 Screen Replacement, Remove the bottom lid: stap 6, afbeelding 1 van 1
    • Also, remove the bottom plastic lid

  7. Leica CS20 Screen Replacement, Unscrew two black bolts: stap 7, afbeelding 1 van 1
    • …in order to unscrew these two black bolts. Place them separately.

  8. Leica CS20 Screen Replacement, Unscrew 2 bolts: stap 8, afbeelding 1 van 1
    • These bolts also should be unscrewed.

  9. Leica CS20 Screen Replacement, Remove the back cover: stap 9, afbeelding 1 van 1
    • After that the controller’s back wall can be removed

  10. Leica CS20 Screen Replacement, Unscrew four bolts: stap 10, afbeelding 1 van 1
    • Unscrew these four bolts

  11. Leica CS20 Screen Replacement, Unscrew two bolts: stap 11, afbeelding 1 van 1
    • Unscrew these two small bolts. Place them separately.

  12. Leica CS20 Screen Replacement, Unscrew two plastic bolts: stap 12, afbeelding 1 van 1
    • Unscrew these two plastic bolts. Place them separately.

  13. Leica CS20 Screen Replacement, Unscrew two bolts: stap 13, afbeelding 1 van 1
    • Now the last two bolts can be unscrewed

  14. Leica CS20 Screen Replacement, Remove the cage: stap 14, afbeelding 1 van 1
    • This GNSS antenna connector will be disconnected when you pull out the metal cage

  15. Leica CS20 Screen Replacement, Pull out the board: stap 15, afbeelding 1 van 1
    • …than pull out this board carefully

  16. Leica CS20 Screen Replacement, See theribbon cable: stap 16, afbeelding 1 van 1
    • So you wil get an access to this ribbon cable

  17. Leica CS20 Screen Replacement, Unclip the connector: stap 17, afbeelding 1 van 1
    • ...unclip it!

  18. Leica CS20 Screen Replacement, Unclip the connector: stap 18, afbeelding 1 van 1
    • Also, unclip the kyocera-connector to this ribbon cable

  19. Leica CS20 Screen Replacement, Act carefully!: stap 19, afbeelding 1 van 1
    • Proceed with great caution!

  20. Leica CS20 Screen Replacement, Unclip the cable: stap 20, afbeelding 1 van 1
    • Unclip the touchscreen ribbon cable

  21. Leica CS20 Screen Replacement, Remove the whole board: stap 21, afbeelding 1 van 1
    • Now you are able to remove the whole board…

  22. Leica CS20 Screen Replacement, Change the screen!: stap 22, afbeelding 1 van 1
    • And finally, change the screen!

Conclusie

To reassemble your device, follow these instructions in reverse order.

Bijgevoegde documenten

Sandu Tuzarean

Lid sinds: 04/01/25

345 Reputatie

1 Handleiding geschreven

0Gids Commentaar

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 49

Altijd: 405