Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

The purpose of this guide is to replace the LeapPad's battery. The battery is essential to receiving any form of functionality from the device. Without a working battery the device is powerless. Once the replacement is finished, be sure to properly dispose of the old battery at appropriate locations such as a batter recycling center.

  1. Remove the barcode covering the two screws on the lower back of the Leap Pad.
    • Remove the barcode covering the two screws on the lower back of the Leap Pad.

  2. Remove the two 5 mm screws that were covered by the sticker.
    • Remove the two 5 mm screws that were covered by the sticker.

  3. LCD iPhone-scherm fixkits

    De goedkope optie, ondersteund door onze levenslange garantie.

    Koop kits

    LCD iPhone-scherm fixkits

    Bespaar op reparatiekosten, niet op kwaliteit.

    Koop kits
  4. Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.
    • Using a plastic opening tool, pry off the outer protective child proof casing, starting from the bottom.

  5. Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.
    • Remove the 7 mm screw to the right of the cartridge dock, two 8 mm screws in the top left, and the nine 8 mm screws holding the the green shell.

  6. Remove the hard plastic casing, exposing the motherboard and battery.
    • Remove the hard plastic casing, exposing the motherboard and battery.

  7. The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one. The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one.
    • The battery will be glued down, so use the flat end of the spudger to pry out the battery pack. Then using your fingers, grab the wire at the connection point and unplug the battery connector. Replace the battery with a new one.

Conclusie

To reassemble the device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Ryan Arredondo

Lid sinds: 31-08-15

231 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 4-99, Meier Fall 2015 Lid van USF Tampa, Team 4-99, Meier Fall 2015

USFT-MEIER-F15S4G99

4 Leden

10 handleidingen geschreven

Hi Ryan, will removing the battery delete any of the downloaded apps and saved files?

Michael - Antwoord

I’m not Ryan, but I just did this process and the apps and files are all still there.

Kivi Shapiro - Antwoord

What is a spudger and where do I get a battery

P Mac - Antwoord

Hello, if anyone still has this leappad Ultra and wanted to purchase a new battery. I have found a retail store https://batteryclerk.com/ The price is reasonable, and I'm just waiting for the batteries to arrive.

Mike Silva - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 5

Afgelopen 7 dagen: 21

Afgelopen 30 dagen: 148

Altijd: 12,221