Inleiding

A quick guide to removing the front cover of the flip phone.

  1. Turn the phone on its back.
    • Turn the phone on its back.

    Voeg opmerking toe

  2. Orient the phone as shown.
    • Orient the phone as shown.

    • Remove the battery cover by pushing upward with your thumb.

    Voeg opmerking toe

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Place your fingernail at the top of the battery and pry the battery out towards you.

    Voeg opmerking toe

    • Flip the phone open.

    • Remove the four rubber plugs, located at the corners of the LCD screen, with a push-pin.

    • Use a Phillips #00 screwdriver to remove the four screws located underneath the rubber plugs.

    Voeg opmerking toe

    • Insert the plastic opening tool in the seam of the top portion of the flip phone.

    • Gently pry the seam open.

    • Move the opening tool around the perimeter of the seam and gently take the front LCD face plate out.

    Voeg opmerking toe

    • Close the flip phone.

    • Hold the base of the phone and gently remove the faceplate.

    • Place the phone and the faceplate on a clean, flat surface.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Douglas Blaalid

Lid sinds: 13-01-10

282 Reputatie

8 handleidingen geschreven

Team

Cal Poly, Team 4-13, Forte Winter 2010 Lid van Cal Poly, Team 4-13, Forte Winter 2010

CPSU-FORTE-W10S4G13

5 Leden

15 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 1,835