Inleiding

This guide will show you how to replace the screen.

Onderdelen

Geen onderdelen nodig.

Remove the four rubber stoppers around the main screen using a pointed-end spudger
  • Remove the four rubber stoppers around the main screen using a pointed-end spudger

Voeg opmerking toe

Use a number #00 Philips screwdriver to unscrew the four screws under the rubber stoppers
  • Use a number #00 Philips screwdriver to unscrew the four screws under the rubber stoppers

Voeg opmerking toe

  • Use a plastic opening tool, pry the top end open

  • Whilst prying the top panel with one plastic opening tool, use a thinner iPod opening tool to slide down the gap and pry open the case

  • Free the opposite side in the same manner

Voeg opmerking toe

  • Remove plastic screen panel to reveal internal components

Voeg opmerking toe

  • Remove the screen board by lifting away from the phone

  • Remove speaker by prying with a spudger

Voeg opmerking toe

  • Once screen board is pulled away, gently press out the plastic screen

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Nico Chiarito

Lid sinds: 21-01-10

22 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 8-47, Regan Winter 2010 Lid van Cal Poly, Team 8-47, Regan Winter 2010

CPSU-REGAN-W10S8G47

5 Leden

8 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 2,313