Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

The following guide explains how to replace the charger port.

  1. Remove back cover. Remove the battery and simcard.
    • Remove back cover.

    • Remove the battery and simcard.

  2. Remove the 12 screws (with the phillips head 000) around frame and near sim and sd cards.
    • Remove the 12 screws (with the phillips head 000) around frame and near sim and sd cards.

  3. Essentiële Electronica Toolkit

    Kleine toolkit. Grote dromen.

    Shop Toolkits

    Essentiële
    Electronica
    Toolkit

    Shop Toolkits
  4. Remove bottom plate where the charger port is located.
    • Remove bottom plate where the charger port is located.

  5. Remove the back piece. Remove the back piece.
    • Remove the back piece.

  6. Using soldering iron, loosen the charger port from the bottom of the device.
    • Using soldering iron, loosen the charger port from the bottom of the device.

  7. Using a smudger, lift the charger port and replace as necessary.
    • Using a smudger, lift the charger port and replace as necessary.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Bruna

Lid sinds: 08-10-14

527 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 9-1, Leahy Fall 2014 Lid van USF Tampa, Team 9-1, Leahy Fall 2014

USFT-LEAHY-F14S9G1

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 3

Altijd: 2,858