Onderdelen

Geen onderdelen nodig.

  1. With one hand, push the rectangular button located on the back top-side of the phone.
    • With one hand, push the rectangular button located on the back top-side of the phone.

    • With your other hand, remove the rear cover.

    Voeg opmerking toe

  2. Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.
    • Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Now pull off the rear casing, using an opening tool. **Buttons for volume and pictures may fall out**

    Voeg opmerking toe

    • Hold the circuit board and turn the phone upside down.

    • Then let the circuit board hang down so you can disconnect the ribbon by getting under an edge and popping it off. **the rubber keyboard may fall out**

    Voeg opmerking toe

    • Once the circuit board has been removed the rubber keypad will be visible. If it has not fallen out on its own it can simply be peeled out. It is lightly attached like a sticker on the top three tabs. The left most table is labeled “B”, the center tab is blank, and the right tab is labeled “N”.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

kristie

Lid sinds: 23-10-13

538 Reputatie

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 2

Altijd: 141