Ga door naar hoofdinhoud

Inleiding

If the speaker is blown or no sound is coming out this will show you how to replace a broken speaker.

Onderdelen

Geen onderdelen opgegeven.

  1. Use a plastic opening tool to remove the back cover.
    • Use a plastic opening tool to remove the back cover.

  2. Use a plastic opening tool to remove the battery, lifting from the bottom right corner.
    • Use a plastic opening tool to remove the battery, lifting from the bottom right corner.

  3. Use a Phillips #00 Screwdriver to remove all eight 4mm screws.
    • Use a Phillips #00 Screwdriver to remove all eight 4mm screws.

  4. Use a plastic opening tool to remove the back trim by working around all of the edges. Use a plastic opening tool to remove the back trim by working around all of the edges.
    • Use a plastic opening tool to remove the back trim by working around all of the edges.

  5. Remove the volume buttons from the side. Remove the volume buttons from the side.
    • Remove the volume buttons from the side.

  6. Use a plastic opening tool to lift the speaker off by prying under the silver square as shown. Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.
    • Use a plastic opening tool to lift the speaker off by prying under the silver square as shown.

    • Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Daniela Allbright

Lid sinds: 08-10-14

605 Reputatie

3 handleidingen geschreven

Team

USF Tampa, Team 14-1, Leahy Fall 2014 Lid van USF Tampa, Team 14-1, Leahy Fall 2014

USFT-LEAHY-F14S14G1

3 Leden

5 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 1

Altijd: 166