Inleiding

Use this guide to remove the speakers from the device.

Onderdelen

Geen onderdelen nodig.

  1. Use the spudger to pry out the indicated rubber squares. Use the #0 Phillips screwdriver to take out the revealed screws. Use the #0 Phillips screwdriver to take out the revealed screws.
    • Use the spudger to pry out the indicated rubber squares.

    • Use the #0 Phillips screwdriver to take out the revealed screws.

  2. Carefully lodge the spudger between the face plate and the hinge mechanism. Gently pry the face plate until it releases from place holders. Gently pry the face plate until it releases from place holders.
    • Carefully lodge the spudger between the face plate and the hinge mechanism.

    • Gently pry the face plate until it releases from place holders.

  3. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel

    Ooit iets gerepareerd? Je bent een genie.

    Deel je reparatie met #ImAGenius

    We zijn allemaal genieën

    Deel je reparatie met #ImAGenius

  4. Using a spudger, detach the speakers from their place holders. Using a spudger, detach the speakers from their place holders.
    • Using a spudger, detach the speakers from their place holders.

  5. Using the spudger, pry between the speaker circuit board and base to detach with ease.
    • Using the spudger, pry between the speaker circuit board and base to detach with ease.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Harry Black

Lid sinds: 20-04-10

56 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team 10-44, Garner Spring 2010 Lid van Cal Poly, Team 10-44, Garner Spring 2010

CPSU-GARNER-S10S10G44

4 Leden

18 handleidingen geschreven

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,434