Ga door naar hoofdinhoud

LG L1200 Logic Board Replacement

Wat je nodig hebt

  1. LG L1200 Logic Board Replacement, Logic Board: stap 1, afbeelding 1 van 1
    • Make sure you remove the battery by lifting the tab on the back of the phone before opening the case.

    • Poke out rubber covers using a spudger or pointy object, such as a thumb tack.

  2. LG L1200 Logic Board Replacement: stap 2, afbeelding 1 van 1
    • Use a T6 torx screwdriver to unscrew the 6 screws that hold the back casing on.

  3. LG L1200 Logic Board Replacement: stap 3, afbeelding 1 van 1
    • Use IPod opening tool to separate back housing.

    • There are two tabs located on either side of the phone.

  4. LG L1200 Logic Board Replacement: stap 4, afbeelding 1 van 1
    • Separate the back housing from the phone.

    • Be careful not to rip out the wire (highlighted in yellow) when separating the back housing.

  5. LG L1200 Logic Board Replacement: stap 5, afbeelding 1 van 1
    • Use a spudger to disconnect antenna wire.

  6. LG L1200 Logic Board Replacement: stap 6, afbeelding 1 van 1
    • Use the IPod opening tool to pop out the logic board.

  7. LG L1200 Logic Board Replacement: stap 7, afbeelding 1 van 1
    • Use the IPod opening tool to disconnect the main ribbon.

  8. LG L1200 Logic Board Replacement: stap 8, afbeelding 1 van 1
    • Once the ribbon is detached, remove the logic board and replace if necessary.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Joshua Herrmann

Lid sinds: 04/16/10

8 Reputatie

8 handleidingen geschreven

Team

Cal Poly, Team 6-14, Maness Spring 2010 Lid van Cal Poly, Team 6-14, Maness Spring 2010

CPSU-MANESS-S10S6G14

4 Leden

16 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 1

Altijd: 1,210