Inleiding

Many hardware repairs require access to the internal components of your phone. This guide will show you how to remove the back panel of your phone to access its internal hardware.

Onderdelen

Geen onderdelen nodig.

Flip your phone over and locate the battery cover.
  • Flip your phone over and locate the battery cover.

Voeg opmerking toe

Slide the cover downward to reveal the battery below.
  • Slide the cover downward to reveal the battery below.

Voeg opmerking toe

  • Place the plastic opening tool in the divet in the bottom left-hand corner.

  • Pry the battery upward to remove it.

Voeg opmerking toe

  • Unscrew the four 4.5mm screws using the Philips #00 screw driver.

Voeg opmerking toe

  • Wedge the plastic opening tool between the screen and the case.

  • Gently move the tool along the edge to loosen the screen from the casing. Repeat this for the entire outer edge of the screen.

    • You should not completely separate the screen from the case in this step.

Voeg opmerking toe

  • Flip your phone over to the battery side.

  • Push the plastic opening tool into the lower seam between the frame and front cover to separate the back panel.

    • Push the scroll wheel, located in the upper left corner, in while lifting the back cover off to prevent breaking it.

  • The volume, lock, and camera buttons are loose so don't lose them.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kimberly Kha

Lid sinds: 16-04-13

163 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 2-18, Maness Spring 2013 Lid van Cal Poly, Team 2-18, Maness Spring 2013

CPSU-MANESS-S13S2G18

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 3

Altijd: 439