Inleiding

How to remove the display screen from an LG CG180 cell phone.

Power down the cell phone by pressing and holding down the red "end call" button.
  • Power down the cell phone by pressing and holding down the red "end call" button.

Voeg opmerking toe

Turn the phone screen-down so you are looking at the back cover.
  • Turn the phone screen-down so you are looking at the back cover.

Voeg opmerking toe

Slide the back cover down using your finger to remove the cover from the phone. Slide the back cover down using your finger to remove the cover from the phone.
  • Slide the back cover down using your finger to remove the cover from the phone.

Voeg opmerking toe

Place your finger at the top of the battery in small gap.
  • Place your finger at the top of the battery in small gap.

Voeg opmerking toe

Press downward while pulling outward to remove the battery.
  • Press downward while pulling outward to remove the battery.

Voeg opmerking toe

Remove all four screws on the back of the phone using a Phillips #00 screwdriver.
  • Remove all four screws on the back of the phone using a Phillips #00 screwdriver.

Voeg opmerking toe

MacBook Battery Fix Kits
Fix Kits Starting at $69.99
MacBook Battery Fix Kits
Starting at $69.99
Insert a plastic opening tool in the seam.
  • Insert a plastic opening tool in the seam.

Voeg opmerking toe

Run the tool along the seam to release all the tabs. Run the tool along the seam to release all the tabs.
  • Run the tool along the seam to release all the tabs.

Voeg opmerking toe

Pull the phone back cover off once all the tabs are released. Pull the phone back cover off once all the tabs are released.
  • Pull the phone back cover off once all the tabs are released.

Voeg opmerking toe

Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.
  • Push the contents of the phone away from the hardshell case by applying pressure to the keypad with both thumbs.

Voeg opmerking toe

The hardshell case is separated from the rest of the phone.
  • The hardshell case is separated from the rest of the phone.

Voeg opmerking toe

Separate keypad from circuit board by turning it upside down and allowing it to fall off. Separate keypad from circuit board by turning it upside down and allowing it to fall off.
  • Separate keypad from circuit board by turning it upside down and allowing it to fall off.

Voeg opmerking toe

Place the circuit board with the display facing downward.
  • Place the circuit board with the display facing downward.

Voeg opmerking toe

Use thumb to release both white clips at the top of the circuit board.
  • Use thumb to release both white clips at the top of the circuit board.

  • Be careful with the display because it is still attached by electrical tape.

Voeg opmerking toe

Once both clips are released, turn over the circuit board so that the display is facing upward. Carefully lift the display from the left side and open to the right.
  • Once both clips are released, turn over the circuit board so that the display is facing upward.

  • Carefully lift the display from the left side and open to the right.

Voeg opmerking toe

Carefully remove the electrical tape from the display.
  • Carefully remove the electrical tape from the display.

Voeg opmerking toe

The display is disconnected from the circuit board.
  • The display is disconnected from the circuit board.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Alex Jacobs

Lid sinds: 21-01-10

5 reputatie

8 handleidingen geschreven

Team

Cal Poly, Team 14-42, Regan Winter 2010 Lid van Cal Poly, Team 14-42, Regan Winter 2010

CPSU-REGAN-W10S14G42

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 1,660