Inleiding

This guide will teach you how to remove the back speaker, located directly underneath the back cover. Only minimal disassembly is required.

  1. On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward. On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.
    • On the back of the phone, place your thumb on the three raised bumps and slide the back cover upward.

  2. Lift and remove the battery.
    • Lift and remove the battery.

  3. Remove the two screw covers at the top of phone with tweezers. Remove the two screw covers at the top of phone with tweezers.
    • Remove the two screw covers at the top of phone with tweezers.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100,00 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Remove the six Phillips #000 (3mm) screws.
    • Remove the six Phillips #000 (3mm) screws.

  6. Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone. The plastic side buttons fall out when you take the back cover off. The back cover is connected to the speaker by red and black wires.
    • Use the plastic opening tool to pry the back cover off. Insert the tool between the back cover and red mid section and go around the entire phone.

    • The plastic side buttons fall out when you take the back cover off.

    • The back cover is connected to the speaker by red and black wires.

  7. Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.
    • Use the tweezers to remove the red and black wires connecting the speaker to the green motherboard by pinching the sides of the plastic base near the motherboard.

    • Set the back cover with the speaker aside.

  8. Use the plastic opening tool to pry the speaker cover off of the phone.
    • Use the plastic opening tool to pry the speaker cover off of the phone.

  9. Use the plastic opening tool to pry the speaker out of the back cover.
    • Use the plastic opening tool to pry the speaker out of the back cover.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Annie White

Lid sinds: 18-10-13

262 Reputatie

2 handleidingen geschreven

Team

Cal Poly, Team 4-27, Amido Fall 2013 Lid van Cal Poly, Team 4-27, Amido Fall 2013

CPSU-AMIDO-F13S4G27

4 Leden

16 handleidingen geschreven

Één commentaar

Where can I buy the replacement parts?

Sarah Birkett - Antwoord

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 141