Onderdelen

Geen onderdelen nodig.

  1. Power phone off by pressing and holding red button.
    • Power phone off by pressing and holding red button.

  2. Flip over phone to expose the rear.
    • Flip over phone to expose the rear.

  3. Slide rear cover downward and lift off.  You can now access the battery.
    • Slide rear cover downward and lift off. You can now access the battery.

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Gently lift battery from bottom.  Battery should lift out easily.
    • Gently lift battery from bottom. Battery should lift out easily.

  6. Use PH00 screw driver bit to loosen and remove six screws
    • Use PH00 screw driver bit to loosen and remove six screws

    • Save screws for reassembly.

  7. Use plastic opening tool to release the casing cover. Run the tool along edge of phone.
    • Use plastic opening tool to release the casing cover.

    • Run the tool along edge of phone.

    • Lift casing cover.

  8. Use plastic opening tool or fingernail to lift rectangular piece up. The piece can be identified by the orange tape attached to it. Use plastic opening tool or fingernail to lift rectangular piece up. The piece can be identified by the orange tape attached to it.
    • Use plastic opening tool or fingernail to lift rectangular piece up. The piece can be identified by the orange tape attached to it.

  9. Dislodge logic board using a plastic opening tool.
    • Dislodge logic board using a plastic opening tool.

  10. Remove logic board by lifting up.
    • Remove logic board by lifting up.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

JP Belanger

Lid sinds: 17-02-15

213 Reputatie

2 handleidingen geschreven

Team

Ohio State, Team 1-1, Buehl Winter 2015 Lid van Ohio State, Team 1-1, Buehl Winter 2015

OSU-BUEHL-W15S1G1

4 Leden

8 handleidingen geschreven

Één commentaar

Hi, do you know how to take the microphone out without damaging the functionality of the phone? It’s attached to a ribbon that is soldered on. Thanks!

Kobalt000 - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 13

Altijd: 554