Inleiding

The LCD screen displays the photos on the camera, making it one of the more important parts for functionality. If your screen breaks or gets scratched, follow this guide to replace the LCD screen.

Onderdelen

Geen onderdelen nodig.

Slide the door on the bottom of the camera in the direction of the open symbol with your finger. Release and the door will pop open. Release and the door will pop open.
  • Slide the door on the bottom of the camera in the direction of the open symbol with your finger.

  • Release and the door will pop open.

Voeg opmerking toe

Slide the battery out. Slide the battery out.
  • Slide the battery out.

Voeg opmerking toe

Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling. Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.
  • Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.

Voeg opmerking toe

Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string. Push up so that the string starts to come out of the top of the loop. Grab the string from above the loop and pull.
  • Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string.

  • Push up so that the string starts to come out of the top of the loop.

  • Grab the string from above the loop and pull.

Voeg opmerking toe

Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further. Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.
  • Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.

Voeg opmerking toe

Separate the two pieces of the loop and pull the lens cover up in between them. Separate the two pieces of the loop and pull the lens cover up in between them. Separate the two pieces of the loop and pull the lens cover up in between them.
  • Separate the two pieces of the loop and pull the lens cover up in between them.

Voeg opmerking toe

Pull the lens cover and the sting will come out of the metal slab. Pull the lens cover and the sting will come out of the metal slab. Pull the lens cover and the sting will come out of the metal slab.
  • Pull the lens cover and the sting will come out of the metal slab.

Voeg opmerking toe

Place lens cover back on the lens to prevent scratches or debris but leave string detached. Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side. Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side.
  • Place lens cover back on the lens to prevent scratches or debris but leave string detached.

  • Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side.

Voeg opmerking toe

Pull the back cover away from the front cover. You may need to use a plastic opening tool as a wedge if it does not come apart by easily. You may need to use a plastic opening tool as a wedge if it does not come apart by easily.
  • Pull the back cover away from the front cover.

  • You may need to use a plastic opening tool as a wedge if it does not come apart by easily.

Voeg opmerking toe

Separate the back cover from the front cover.
  • Separate the back cover from the front cover.

Voeg opmerking toe

Flip the LCD screen down. Flip the LCD screen down. Flip the LCD screen down.
  • Flip the LCD screen down.

Voeg opmerking toe

Locate the two sets of black tabs connecting the flat orange cables to the motherboard. Slide the 2 sets of tabs down with a tool or your finger to release the cables. Slide the 2 sets of tabs down with a tool or your finger to release the cables.
  • Locate the two sets of black tabs connecting the flat orange cables to the motherboard.

  • Slide the 2 sets of tabs down with a tool or your finger to release the cables.

Voeg opmerking toe

Gently pull the LCD screen down until the orange cables separate from the motherboard. Gently pull the LCD screen down until the orange cables separate from the motherboard.
  • Gently pull the LCD screen down until the orange cables separate from the motherboard.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Kirsten Price

Lid sinds: 17-09-14

343 reputatie

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 12

Altijd: 461