Inleiding

The button pad lets the user control actions on the LCD screen. The arrow pad allows the user to move up, down, left, right, and select.

Onderdelen

Geen onderdelen nodig.

Slide the door on the bottom of the camera in the direction of the open symbol with your finger. Release and the door will pop open. Release and the door will pop open.
  • Slide the door on the bottom of the camera in the direction of the open symbol with your finger.

  • Release and the door will pop open.

Voeg opmerking toe

Slide the battery out. Slide the battery out.
  • Slide the battery out.

Voeg opmerking toe

Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling. Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.
  • Remove lens cover from the camera by squeezing the protruding button on each side of the cover and pulling.

Voeg opmerking toe

Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string. Push up so that the string starts to come out of the top of the loop. Grab the string from above the loop and pull.
  • Pull the lens cover string toward the ground so that the loop underneath the metal slab is on top of the cover string.

  • Push up so that the string starts to come out of the top of the loop.

  • Grab the string from above the loop and pull.

Voeg opmerking toe

Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further. Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.
  • Feed the string on top into the metal slab while pulling the loop toward you until the plastic piece stops you from pulling any further.

Voeg opmerking toe

Separate the two pieces of the loop and pull the lens cover up in between them. Separate the two pieces of the loop and pull the lens cover up in between them. Separate the two pieces of the loop and pull the lens cover up in between them.
  • Separate the two pieces of the loop and pull the lens cover up in between them.

Voeg opmerking toe

Pull the lens cover and the sting will come out of the metal slab. Pull the lens cover and the sting will come out of the metal slab. Pull the lens cover and the sting will come out of the metal slab.
  • Pull the lens cover and the sting will come out of the metal slab.

Voeg opmerking toe

Flip open the door on the right side of the camera, when looking at the LCD screen. This door has a memory card and A/V OUT symbol on it. This door has a memory card and A/V OUT symbol on it.
  • Flip open the door on the right side of the camera, when looking at the LCD screen.

  • This door has a memory card and A/V OUT symbol on it.

Voeg opmerking toe

Gently push SD/MMC to eject. Gently push SD/MMC to eject.
  • Gently push SD/MMC to eject.

Voeg opmerking toe

Pull SD/MMC out of the camera. Pull SD/MMC out of the camera.
  • Pull SD/MMC out of the camera.

Voeg opmerking toe

Place lens cover back on the lens to prevent scratches or debris but leave string detached. Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side. Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side.
  • Place lens cover back on the lens to prevent scratches or debris but leave string detached.

  • Remove a total of six 3.968mm Phillips #00 screws. Two each from the left side, bottom, and right side.

Voeg opmerking toe

Pull the back cover away from the front cover. You may need to use a plastic opening tool as a wedge if it does not come apart by easily. You may need to use a plastic opening tool as a wedge if it does not come apart by easily.
  • Pull the back cover away from the front cover.

  • You may need to use a plastic opening tool as a wedge if it does not come apart by easily.

Voeg opmerking toe

Separate the back cover from the front cover.
  • Separate the back cover from the front cover.

Voeg opmerking toe

Remove two Phillips #00 screws from the inside of the button pad on the back cover. Remove two Phillips #00 screws from the inside of the button pad on the back cover. Remove two Phillips #00 screws from the inside of the button pad on the back cover.
  • Remove two Phillips #00 screws from the inside of the button pad on the back cover.

Voeg opmerking toe

Remove the metal piece shown. Remove the metal piece shown.
  • Remove the metal piece shown.

Voeg opmerking toe

Remove the black ring from the back and the white button pad will fall out from the front. Remove the black ring from the back and the white button pad will fall out from the front.
  • Remove the black ring from the back and the white button pad will fall out from the front.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Kirsten Price

Lid sinds: 17-09-14

343 Reputatie

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 2

Afgelopen 30 Dagen: 5

Altijd: 291