Onderdelen

Geen onderdelen nodig.

  1. Place thumb firmly on battery cover. Slide thumb right, the cover should follow and pop up.
    • Place thumb firmly on battery cover.

    • Slide thumb right, the cover should follow and pop up.

  2. Place thumb on orange tab and pull back towards screen. The battery should pop up.
    • Place thumb on orange tab and pull back towards screen.

    • The battery should pop up.

    • Gently lift battery out.

  3. Remove screws from along outer edge of casing. There are 6 screws in total. Righty tighty, lefty loosey!
    • Remove screws from along outer edge of casing.

    • There are 6 screws in total.

    • Righty tighty, lefty loosey!

  4. Gratis verzending van alle bestellingen van meer dan US$ 100 of met een Pro Tech Toolkit!

    Doorblader onze winkel
  5. Gently lift off front and back casing. Gently lift off front and back casing. Gently lift off front and back casing.
    • Gently lift off front and back casing.

  6. Remove screws along side. Gently peel off side casing. Gently peel off side casing.
    • Remove screws along side.

    • Gently peel off side casing.

  7. Remove screws from front silver panel. Remove screws from front silver panel. Remove screws from front silver panel.
    • Remove screws from front silver panel.

  8. Lift up ribbon cable fastener with blue plastic opening tool. Gently pull out lens. Gently pull out lens.
    • Lift up ribbon cable fastener with blue plastic opening tool.

    • Gently pull out lens.

  9. To place new lens, peel off silver tape before inserting ribbon cable into proper slot.
    • To place new lens, peel off silver tape before inserting ribbon cable into proper slot.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Brian

Lid sinds: 13-03-14

252 Reputatie

2 handleidingen geschreven

Team

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 2

Altijd: 156