Repareer je spullen Gemeenschap Winkel

KitchenAid KSM150PSER Carbon Brushes Replacement

Inleiding

If your device is not turning on it could be because of worn down carbon brushes. Here is a guide to replace these brushes.

Wat je nodig hebt

  1. KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: stap 1, afbeelding 1 van 2 KitchenAid KSM150PSER Carbon Brushes Replacement, Carbon Brushes: stap 1, afbeelding 2 van 2

    • Using a flat head screwdriver, unscrew the brush cap on each side of the mixer by turning them counter clockwise.

    • Remove brush cap by pulling it toward you.

    • The brushes are held in by springs and will fly out if removed too fast.

    Vertaal

  3. KitchenAid KSM150PSER Carbon Brushes Replacement: stap 2, afbeelding 1 van 1

    • Remove brush by pulling it toward you.

    • One corner of the brush is flattened. You can check which way the brush is oriented by shining a flashlight inside the hole.

    Vertaal
Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Auteur

met 2 andere bijdragers

Hayley Young

Lid sinds: 12/03/16

211 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

Team

Cal Poly, Team S2-G5, Livingston Winter 2018 Lid van Cal Poly, Team S2-G5, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G5

4 Leden

10 handleidingen geschreven

Één opmerking

I’ve been procrastinating on trying to fix my KA mixer on my own…today I did it. The directions were pretty clear and the only thing wrong was that when I had previously cleaned my mixer, I put the carbon brushes in the wrong way. Once I shined a flashlight into the hole I could see where the notched corner went.

Amber Reimer - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 37

Afgelopen 30 dagen: 190

Altijd: 14,636