Ga door naar hoofdinhoud

Keurig K40 Top Water Pump Replacement

Wat je nodig hebt

  1. Keurig K40 Top Water Pump Replacement, Top Water Pump: stap 1, afbeelding 1 van 1
    • Begin by removing the top cover from the device.

    • Remove the cover by gently rocking it back and forth with an emphasis on lowering the left side underneath an internal peg.

  2. Keurig K40 Top Water Pump Replacement: stap 2, afbeelding 1 van 1
    • Unscrew both 1.5mm screws located on the water pump.

  3. Keurig K40 Top Water Pump Replacement: stap 3, afbeelding 1 van 2 Keurig K40 Top Water Pump Replacement: stap 3, afbeelding 2 van 2
    • Keeping one hand firmly placed on the device, tug upwards on the water pump until it is separated from the device.

    • The water pump and pipe should now be loose and easy to move as shown.

  4. Keurig K40 Top Water Pump Replacement: stap 4, afbeelding 1 van 2 Keurig K40 Top Water Pump Replacement: stap 4, afbeelding 2 van 2
    • Pull on the point where the pipe meets the water pump.

    • The pipe will come loose and the water filter will be free and ready to be replaced.

Conclusie

To reassemble your device, follow these instructions in reverse order.

5 andere personen hebben deze handleiding voltooid.

Andrew Bornemann

Lid sinds: 02/08/16

476 Reputatie

2 handleidingen geschreven

Team

USF Tampa, Team 6-1, Eyestone Spring 2016 Lid van USF Tampa, Team 6-1, Eyestone Spring 2016

USFT-EYESTONE-S16S6G1

3 Leden

5 handleidingen geschreven

4 opmerkingen

I NEED ONE OF THESE! Where can I find one????

G Steve - Antwoord

This is a check valve, not the water pump.

Rick Koen - Antwoord

Please rename this article. The item is not a water pump.

tvyse46 - Antwoord

I viewed this to replace the pump. But after the checkvalve was replaced through these instructions my K40 works like new. Thank you.

Glenn Stanley - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 7

Afgelopen 30 dagen: 45

Altijd: 9,388