Inleiding
To get to the spring the K-cup assembly housing, the lid, and the water pump will need to be removed.
Wat je nodig hebt
-
-
Using a Phillips #2 screwdriver unscrew two 2mm screws.
-
Once the screws are out, lift up and squeeze the k-cup assembly housing to take it out.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annuleren: ik heb deze handleiding niet afgemaakt.
Één andere persoon heeft deze handleiding voltooid.