Inleiding

Use this guide to replace a faulty water pump on your Kenmore 110 Series Washing Machine.

Gereedschap

Onderdelen

Geen onderdelen nodig.

Unplug the washing machine!
  • Unplug the washing machine!

  • Carefully lay washing machine on its back.

Voeg opmerking toe

Carefully remove both wire harnesses connected to the pump.
  • Carefully remove both wire harnesses connected to the pump.

  • Squeeze and pull back hose clamp.

  • Twist drain hose off of pump.

  • Using a 1/4" socket wrench, remove the three mounting screws.

  • Pull the pump out of place.

  • Pulling the pump away takes a little force.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Robert Trout

Lid sinds: 26-09-12

777 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 15-43, Forte Fall 2012 Lid van Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Leden

5 handleidingen geschreven

i have a speed problem with my washer ...

http://tristaterepairs.com/dryer-repair....

Andre Matthew - Antwoord

please provide info on how to test the water pump once it's removed...

Oscar Ramos - Antwoord

The instructions say nothing of the pulley belt and wheel.

I'm looking to work on a 110. 81080100

and

I have read that transmission fluid leaks out when the washer is on its side.

Is there a way to temporarily plug it?

thomas - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 19

Afgelopen 7 Dagen: 104

Afgelopen 30 Dagen: 399

Altijd: 34,478