Inleiding

Use this guide to replace a worn drive belt in a Kenmore 110 Series Washing Machine.

Onderdelen

Geen onderdelen nodig.

To avoid risk of electric shock, unplug the washing machine.
  • To avoid risk of electric shock, unplug the washing machine.

  • Lay the washing machine on its back.

Voeg opmerking toe

Using a 5/16" socket wrench, remove both screws from the belt cover. Remove the belt cover from the washer. Remove the belt cover from the washer.
  • Using a 5/16" socket wrench, remove both screws from the belt cover.

  • Remove the belt cover from the washer.

Voeg opmerking toe

Using a 1/2" socket, remove the bolt securing the drive pulley. Remove the drive pulley and belt. When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.
  • Using a 1/2" socket, remove the bolt securing the drive pulley.

  • Remove the drive pulley and belt.

  • When installing a new belt, wrap the belt around both the motor and drive pulleys before reinstalling the drive pulley.

I have difficulty to remove the bolt suring the pulley. Is there any tricky to move the bolt?

John Wang - Antwoord

need to remove shaft off pulley

Valery Ryz -

I have a very old Kenmore Washer. The belt is loose but not broken. How do I tighten?

teedle54 - Antwoord

Conclusie

To reassemble your device, follow these instructions in reverse order.

7 andere personen hebben deze handleiding voltooid.

Robert Trout

Lid sinds: 26-09-12

742 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team 15-43, Forte Fall 2012 Lid van Cal Poly, Team 15-43, Forte Fall 2012

CPSU-FORTE-F12S15G43

5 Leden

5 handleidingen geschreven

Één commentaar

What would be reason that rinse cycle doesn't spin and it leaks

lauraleahenquinette - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 20

Afgelopen 7 Dagen: 206

Afgelopen 30 Dagen: 1,054

Altijd: 67,582