Inleiding

These instructions will demonstrate how to remove the front LCD screen from the KDDI Kyocera A5521K.

Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone. Beneath the covers are screws. Beneath the covers are screws.
  • Pry, with a metal probe, the black covers that are located by the pivoting joints of the phone.

    • Beneath the covers are screws.

Voeg opmerking toe

Remove the screws using a Y0 screwdriver.
  • Remove the screws using a Y0 screwdriver.

Voeg opmerking toe

Use the iPod pry tool to remove the outer screen. Two screws are now visible. Be careful not to crack the screen upon removal.  It is adhered strongly to the phone.
  • Use the iPod pry tool to remove the outer screen.

    • Two screws are now visible.

    • Be careful not to crack the screen upon removal. It is adhered strongly to the phone.

Voeg opmerking toe

Use the Y0 screwdriver to remove the screws.
  • Use the Y0 screwdriver to remove the screws.

Voeg opmerking toe

Use the iPod pry tool to loosen the faceplate from the phone. Slide the pry tool along the entire crease of the faceplate to completely detach it.
  • Use the iPod pry tool to loosen the faceplate from the phone.

    • Slide the pry tool along the entire crease of the faceplate to completely detach it.

Voeg opmerking toe

Separate the faceplate from the phone. Separate the faceplate from the phone. Separate the faceplate from the phone.
  • Separate the faceplate from the phone.

Voeg opmerking toe

Rotate the phone 180 degrees. Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip). Pull the flexible circuit to towards you to separate the front LCD screen from the phone.
  • Rotate the phone 180 degrees.

  • Grab the flexible circuit with tweezers (or use your fingers if you can manage a firm grip).

  • Pull the flexible circuit to towards you to separate the front LCD screen from the phone.

Voeg opmerking toe

Firmly pull the flexible circuit from the connector. Be careful not to damage the flexible circuit. The front LCD screen should now be separate from the phone.
  • Firmly pull the flexible circuit from the connector.

    • Be careful not to damage the flexible circuit.

    • The front LCD screen should now be separate from the phone.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Dominic Grisafe

Lid sinds: 15-04-10

133 Reputatie

20 handleidingen geschreven

Team

Cal Poly, Team 28-25, Regan Spring 2010 Lid van Cal Poly, Team 28-25, Regan Spring 2010

CPSU-REGAN-S10S28G25

4 Leden

20 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 3

Altijd: 1,248