Repareer je spullen Gemeenschap Winkel

Jazz UltraTab C1059-HL Antenna Replacement

Inleiding

This guide will guide the user to effectively remove and replace the antenna. This replacement will take 20-30 minutes. However, if the guide is followed to the letter, the task will be accomplished with minimal damage to the device.

Wat je nodig hebt

  1. Jazz UltraTab C1059-HL Antenna Replacement, Antenna: stap 1, afbeelding 1 van 1

    • First step is to remove screws from top and bottom of device.

    Bewerken

  2. Jazz UltraTab C1059-HL Antenna Replacement: stap 2, afbeelding 1 van 1

    • Remove the back panel of the device.

    Bewerken

  3. Jazz UltraTab C1059-HL Antenna Replacement: stap 3, afbeelding 1 van 1

    • Upon removing the back panel, place the device screen down on the table.

    Bewerken

  4. Jazz UltraTab C1059-HL Antenna Replacement: stap 4, afbeelding 1 van 1

    • Identify the antenna cover on the top of the device.

    Bewerken

  6. Jazz UltraTab C1059-HL Antenna Replacement: stap 5, afbeelding 1 van 1

    • Remove the two screws holding the antenna cover in place.

    Bewerken

  7. Jazz UltraTab C1059-HL Antenna Replacement: stap 6, afbeelding 1 van 1

    • Use a prying tool to remove the plastic piece off of the antenna component.

    Bewerken

  8. Jazz UltraTab C1059-HL Antenna Replacement: stap 7, afbeelding 1 van 1

    • Identify the antenna component as the gray cable that comes out of the plastic cover.

    Bewerken

  9. Jazz UltraTab C1059-HL Antenna Replacement: stap 8, afbeelding 1 van 1

    • Remove all of the adhesive tape pieces off of the antenna cable.

    Bewerken

  10. Jazz UltraTab C1059-HL Antenna Replacement: stap 9, afbeelding 1 van 1

    • Once all of the adhesive tape has been removed. Pull out the antenna component.

    Bewerken

  11. Jazz UltraTab C1059-HL Antenna Replacement: stap 10, afbeelding 1 van 1

    • The antenna will be attached to the chip in your device. Be careful not to pull off.

    • Solder of the wire that is connected to the chip in order to be able to remove the antenna component.

    • Once this is done, you can replace your old antenna with a new one!

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Amanda Justiniano

Lid sinds: 09/19/15

231 Reputatie

2 handleidingen geschreven

Medailles: 5

+2 andere badges

Team

IUPUI, Team 1-3, Wilson Fall 2015 Lid van IUPUI, Team 1-3, Wilson Fall 2015

IUPUI-WILSON-F15S1G3

4 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 4

Afgelopen 30 dagen: 9

Altijd: 199