Ga door naar hoofdinhoud

Wat je nodig hebt

  1. JBL Spyro Bottom Plate Replacement, Locate the risers: stap 1, afbeelding 1 van 1
    • Locate the 3 risers the hold the base plate in place

  2. JBL Spyro Bottom Plate Replacement, Pry the plugs from the risers: stap 2, afbeelding 1 van 1
    • Insert a strong spudger or flathead near the riser and gently pry until the plug starts to come out. Work your way around to loosening each one.

  3. JBL Spyro Bottom Plate Replacement, Remove the base plate: stap 3, afbeelding 1 van 1
    • With all three loosened remove the base!

    • Note the not equilateral placement of the risers when replacing the base.

Conclusie

To reassemble your device, follow these instructions in reverse order.

16 andere personen hebben deze handleiding voltooid.

Ryan McLeod

Lid sinds: 22-05-10

582 Reputatie

2 handleidingen geschreven

7 opmerkingen

Thanks, so nice tip. I'll see if I can find a similar speaker, big hug.

durval - Antwoord

No problem!!

Ryan McLeod -

My speaker is broken like on the image above and it sounds horrible. Do you know where to buy similar speaker in order to replice it?

pszopa - Antwoord

Does anybody know, if I can get a replacement speaker for the subwoofer of the JBL 2.1. system? Thanks!

Lars -

I was unable to find a replacement for the Atlas subwoofer it uses and ended up "recycling" the whole thing :( I've since replaced it with the the Klipsch ProMedia 2.1s and love them.

Ryan McLeod -

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 22

Afgelopen 30 dagen: 122

Altijd: 11,609