Ga door naar hoofdinhoud

JBL L26 Speaker Replacement

Wat je nodig hebt

  1. JBL L26 Speaker Replacement, Speaker: stap 1, afbeelding 1 van 1
    • Remove the four 6.4 mm Phillips #2 screws from the front of the speaker.

  2. JBL L26 Speaker Replacement: stap 2, afbeelding 1 van 1
    • Pull the speaker out of the frame and lay it onto the side.

  3. JBL L26 Speaker Replacement: stap 3, afbeelding 1 van 1
    • Unlatch the green wire by pulling on the terminal connector and not the wire.

  4. JBL L26 Speaker Replacement: stap 4, afbeelding 1 van 2 JBL L26 Speaker Replacement: stap 4, afbeelding 2 van 2
    • Use a small prying tool to pry the terminal connector off of the tap.

    • After you unlatched both edges, pull the black wire out.

  5. JBL L26 Speaker Replacement: stap 5, afbeelding 1 van 1
    • Get your replacement speaker and connect the green wire by pushing the terminal connector onto the tap.

  6. JBL L26 Speaker Replacement: stap 6, afbeelding 1 van 2 JBL L26 Speaker Replacement: stap 6, afbeelding 2 van 2
    • Connect the black wire by attaching the terminal connector onto the tap.

    • Use a clamping tool to clip the edges toward the tap.

    • Be careful not to clamp too hard so you don't damage the tap.

  7. JBL L26 Speaker Replacement: stap 7, afbeelding 1 van 1
    • Place the new speaker onto the frame and screw the four 6.4 mm Phillips #2 screws back in.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nathnael Dubale

Lid sinds: 09/20/20

269 Reputatie

1 Handleiding geschreven

Team

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 6

Afgelopen 30 dagen: 20

Altijd: 1,017