Ga door naar hoofdinhoud

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Internal Battery Circuit Connector

Wat je nodig hebt

  1. Internal Battery Circuit Connector, Batteries: stap 1, afbeelding 1 van 2 Internal Battery Circuit Connector, Batteries: stap 1, afbeelding 2 van 2
    • Flip the camera over so the bottom of the camera is facing you.

    • Turn the mode dial to the OFF position.

  2. Internal Battery Circuit Connector: stap 3, afbeelding 1 van 2 Internal Battery Circuit Connector: stap 3, afbeelding 2 van 2
    • Slide the bottom cover in the direction of the arrow to open it.

  3. Internal Battery Circuit Connector: stap 4, afbeelding 1 van 1
    • Pull out the batteries.

  4. Internal Battery Circuit Connector, Internal Battery Circuit Connector: stap 5, afbeelding 1 van 1
    • Remove the three screws from the circuit connector.

  5. Internal Battery Circuit Connector: stap 6, afbeelding 1 van 1
    • Remove the connector from the battery holder door.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Één andere persoon heeft deze handleiding voltooid.

Nick Oleskowicz

Lid sinds: 04/03/12

287 Reputatie

3 handleidingen geschreven

Team

Cal Poly, Team 15-13, Forte Spring 2012 Lid van Cal Poly, Team 15-13, Forte Spring 2012

CPSU-FORTE-S12S15G13

5 Leden

10 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 12

Altijd: 1,706