Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

The sealing ring can wear out over time and needs to be replaced. This guide will show step by step how to remove and replace the sealing ring of your Instant Pot Smart-60.

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

  1. Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base. Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.
    • Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

  2. De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu

    De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu
  3. Turn the lid upside down to access the sealing ring.
    • Turn the lid upside down to access the sealing ring.

    • Push up on the bottom part of the ring to pop it out of the support.

  4. Remove by gently pulling from the top of the sealing ring.
    • Remove by gently pulling from the top of the sealing ring.

Conclusie

To reassemble your device, follow these instructions in reverse order.

paola alvarez

Lid sinds: 24-01-18

498 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team S1-G4, Livingston Winter 2018 Lid van Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 5

Altijd: 163