Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

The anti-block shield prevents little bits of food from clogging up the pressure release valve. It must be removed and cleaned after every use. This guide will demonstrate how to remove the anti-block shield on the device.

Onderdelen

Geen onderdelen opgegeven.

  1. Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base. Turn the lid upside down to access the anti-block shield.
    • Open the lid of the Instant Pot. Grasp the handle and rotate the lid counter-clockwise, then lift up to separate the lid from the base.

    • Turn the lid upside down to access the anti-block shield.

  2. Manta schroevendraaierset

    112 bitjes voor elke reparatie.

    Upgrade Your Toolbox

    Manta schroevendraaierset

    Upgrade Your Toolbox
  3. Wedge the iFixit opening tool between the anti-block shield and the underside of the lid. Push down on the opening tool until the anti-block shield pops out.
    • Wedge the iFixit opening tool between the anti-block shield and the underside of the lid.

    • Push down on the opening tool until the anti-block shield pops out.

    • The anti-block shield is fit very securely over the vent. It may take some force for it to pop out, and the part may pop out with some speed.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Anya (Anna) Houk

Lid sinds: 24-01-18

143 Reputatie

1 Handleiding geschreven

Team

Cal Poly, Team S1-G4, Livingston Winter 2018 Lid van Cal Poly, Team S1-G4, Livingston Winter 2018

CPSU-LIVINGSTON-W18S1G4

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 308