Ga door naar hoofdinhoud

Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement

Wat je nodig hebt

  1. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement, Bluetooth Button: stap 1, afbeelding 1 van 1
    • Remove the rubber sleeve.

  2. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 2, afbeelding 1 van 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 2, afbeelding 2 van 2
    • Remove 4 screws from the green, plastic button cover.

  3. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 3, afbeelding 1 van 2 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 3, afbeelding 2 van 2
    • After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.

    • Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.

  4. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 5, afbeelding 1 van 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 5, afbeelding 2 van 3 Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 5, afbeelding 3 van 3
    • Screw the 4 screws of the plastic button cover back onto the device.

  5. Insignia NS-SPBTBRICK-CM Bluetooth Button Replacement: stap 6, afbeelding 1 van 1
    • Put the plastic sleeve back onto the speaker.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Erin Steele

Lid sinds: 03/08/17

649 Reputatie

5 handleidingen geschreven

Team

UMass Dartmouth, Team S5-G2, Botvin Spring 2017 Lid van UMass Dartmouth, Team S5-G2, Botvin Spring 2017

UMASSD-BOTVIN-S17S5G2

2 Leden

6 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 57