Repareer je spullen

Recht op reparatie

Winkel

Insignia NS-CLIP02 Speaker replacement and troubleshooting

Geschreven door: Aubrey (en 2 andere bijdragers)
  • Reacties: 0
  • Favorieten: 0

Moeilijkheid

Moeilijk

Stappen

22

Tijd vereist

30 minuten - 1 uur

Secties

2

Markeringen

4

Grammar Police

Grammaticapolitie

Laat je innerlijke leraar Nederlands vrij en help om de grammatica van deze handleiding te verbeteren!

Slice and Dice

Knip- en plakwerk

De stappen in deze handleiding moet worden opgesplitst in een reeks van vereiste handleidingen.

Step Trimmer

Stappen inkorten

Deze handleiding heeft onnodige stappen. Kort ze in om beknopter te kunnen zijn!

Confusing Text

Verwarrende Tekst

Een deel van de tekst in deze handleiding is verwarrend, dubbelop of naast de kwestie. Bewerk de tekst en maak hem duidelijker!

Inleiding

This guide shows how to locate and repair broken connections to the speakers.

Gereedschap

Koop deze gereedschappen

Onderdelen

Geen onderdelen opgegeven.

  1. Locate the bottom of the device.

    • Locate the bottom of the device.

    Bewerken

  2. Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw beneath the sticker.

    • Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw beneath the sticker.

    Bewerken

  3. Locate the 11mm screw beneath the sticker.

    • Locate the 11mm screw beneath the sticker.

    Bewerken

  4. Using a plastic opening tool, peel off the adhesive gel stoppers

    • Using a plastic opening tool, peel off the adhesive gel stoppers

    Bewerken

  5. Continue peeling the rest of the gel stoppers from the bottom of the device.

    • Continue peeling the rest of the gel stoppers from the bottom of the device.

    Bewerken

  6. Begin unscrewing the six 11mm screws with a Phillips head screw driver.

    • Begin unscrewing the six 11mm screws with a Phillips head screw driver.

    Bewerken

  7. Once you peel of the bottom from the device, you will see the motherboard.

    • Once you peel of the bottom from the device, you will see the motherboard.

    Bewerken

  8. Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

    • Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

    Bewerken

  9. SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

    SLA DE UPGRADE OVER

    Bespaar door het te repareren met een alles-in-één kit.

    Koop iPhone-reparatiekits

  10. Lift the motherboard from the device.

    • Lift the motherboard from the device.

    Bewerken

  11. Locate the four plugs connecting the motherboard to the rest of the device.

    • Locate the four plugs connecting the motherboard to the rest of the device.

    Bewerken

  12. Begin with remove the plug to your left.

    • Begin with remove the plug to your left.

    Bewerken

  13. Remove the plug to your right from the motherboard.

    • Remove the plug to your right from the motherboard.

    Bewerken

  14. Remove the plug in the front of the lcd screen plug.

    • Remove the plug in the front of the lcd screen plug.

    Bewerken

  15. Remove the LCD screen plug last. Then, follow the following instructions in reverse to replace the old motherboard with the new one.

    • Remove the LCD screen plug last. Then, follow the following instructions in reverse to replace the old motherboard with the new one.

    Bewerken

  16. Remove the three screws located along the center of the base.

    • Remove the three screws located along the center of the base.

    Bewerken

  17. Remove the base from the display. Remove the base from the display.

    • Remove the base from the display.

    Bewerken

  18. Using a metal spudger, remove the plastic face plate from the display. Using a metal spudger, remove the plastic face plate from the display. Using a metal spudger, remove the plastic face plate from the display.

    • Using a metal spudger, remove the plastic face plate from the display.

    Bewerken

  19. With a phillips screwdriver, remove the six screws shown here.

    • With a phillips screwdriver, remove the six screws shown here.

    Bewerken

  20. Next, using the metal spudger, pry the speaker grilles from the display. Next, using the metal spudger, pry the speaker grilles from the display.

    • Next, using the metal spudger, pry the speaker grilles from the display.

    Bewerken

  21. Using the phillips screwdriver, remove the four screw seen here.

    • Using the phillips screwdriver, remove the four screw seen here.

    Bewerken

  22. Separate the two pieces of the display as shown.

    • Separate the two pieces of the display as shown.

    Bewerken

  23. You can see that there are several points where connections to the speaker are soldered. If all connections are soldered then replacement may be necessary. If all connections are soldered then replacement may be necessary.

    • You can see that there are several points where connections to the speaker are soldered.

    • If all connections are soldered then replacement may be necessary.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Aubrey

Lid sinds: 24-02-15

213 Reputatie

2 handleidingen geschreven

Badges: 9

+6 andere badges

Team

USF Tampa, Team 9-3, Leahy Winter 2015 Lid van USF Tampa, Team 9-3, Leahy Winter 2015

USFT-LEAHY-W15S9G3

4 Leden

6 handleidingen geschreven

0 Opmerkingen

Voeg een opmerking toe

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 86