Repareer je spullen Gemeenschap Winkel

Insignia Flex 8 NS-P08A7100 Screen Replacement

Inleiding

Tablet screens often need replacement. This guide will assist you in a full screen replacement for the Insignia Flex 8 NS-P08A7100 resolving a screen that is cracked, not responding to touch, or not showing anything while powered on.

Warning: Before you begin, discharge your Insignia Flex 8 NS-P08A7100 battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

Wat je nodig hebt

  1. Insignia Flex 8 NS-P08A7100 Screen Replacement, Screen: stap 1, afbeelding 1 van 2 Insignia Flex 8 NS-P08A7100 Screen Replacement, Screen: stap 1, afbeelding 2 van 2

    • Begin by using the opening tool to pry open the back cover. Continue around the edge until the back cover pops off.

    Bewerken

  2. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 2, afbeelding 1 van 2 Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 2, afbeelding 2 van 2

    • Use the opening tool to flip the LCD flex circuit plug upwards. The flex circuit should now be loose. Remove flex circuit by pulling outwards.

    Bewerken

  3. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 3, afbeelding 1 van 2 Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 3, afbeelding 2 van 2

    • Use the opening tool to remove the battery cable from the circuit board.

    Bewerken

  4. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 4, afbeelding 1 van 1

    • Remove the adhesive tape from the bottom of the battery.

    Bewerken

  5. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 5, afbeelding 1 van 1

    • Remove plastic adhesive tape from the side of the battery.

    Bewerken

  6. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 6, afbeelding 1 van 2 Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 6, afbeelding 2 van 2

    • Pry the battery from the back of the LCD screen using the opening tool. Due to the strong adhesive between the battery and screen, this may take some time.

    Bewerken

  8. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 7, afbeelding 1 van 1

    • Begin removing the screws on the circuit board using the phillips-head bit driver. Start with the top left corner.

    Bewerken

  9. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 8, afbeelding 1 van 1

    • Remove the next screw to the right using the phillips-head bit driver.

    Bewerken

  10. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 9, afbeelding 1 van 1

    • Remove the next screw to the right using the phillips-head bit driver. This one is slightly hidden under the flex circuit of the camera.

    Bewerken

  11. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 10, afbeelding 1 van 1

    • Remove the next screw in the right top right using the phillips-head bit driver.

    Bewerken

  12. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 11, afbeelding 1 van 1

    • Remove the next screw in the bottomeright corner using the phillips-head bit driver.

    Bewerken

  13. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 12, afbeelding 1 van 1

    • Remove the next screw in the bottom left corner using the phillips-head bit driver.

    Bewerken

  14. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 13, afbeelding 1 van 1

    • Remove the flex circuit on the left side of the circuit board using the opening tool.

    Bewerken

  15. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 14, afbeelding 1 van 1

    • Remove the speaker cable from the circuit board using the opening tool.

    Bewerken

  16. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 15, afbeelding 1 van 1

    • Remove the camera cable from the circuit board using the opening tool.

    Bewerken

  17. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 16, afbeelding 1 van 1

    • Flip the camera flex circuit clip upwards using the opening tool. Detach the camera flex circuit from the circuit board

    Bewerken

  18. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 17, afbeelding 1 van 1

    • Remove the adhesive tape holding the circuit board to the LCD screen. The circuit should now be free.

    Bewerken

  19. Insignia Flex 8 NS-P08A7100 Screen Replacement: stap 18, afbeelding 1 van 1

    • Pull the circuit board forward for clearance and begin removing the screen with the opening tool.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Marco Soto

Lid sinds: 07/08/19

347 Reputatie

1 Handleiding geschreven

Medailles: 5

+2 andere badges

Team

IUPUI, Team S1-G1, Renguette Summer 2019 Lid van IUPUI, Team S1-G1, Renguette Summer 2019

IUPUI-RENGUETTE-SU19S1G1

3 Leden

2 handleidingen geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 10

Altijd: 345