Repareer je spullen Gemeenschap Winkel

Insignia Flex 10.1 NS-P10A7100 Battery Replacement

Inleiding

For instructions on how to replace the battery of your Insignia Flex 10.1 NS-P10A7100, follow this guide.

Wat je nodig hebt

  1. Insignia Flex 10.1 NS-P10A7100 Battery Replacement, Battery: stap 1, afbeelding 1 van 3 Insignia Flex 10.1 NS-P10A7100 Battery Replacement, Battery: stap 1, afbeelding 2 van 3 Insignia Flex 10.1 NS-P10A7100 Battery Replacement, Battery: stap 1, afbeelding 3 van 3

    • Use the blue iFixit opening tool to remove the backing of the device.

    • Wedge the tool in the crease between the device backing and screen.

    Bewerken

  2. Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 2, afbeelding 1 van 2 Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 2, afbeelding 2 van 2

    • Disconnect the larger ribbon that runs along the top of the battery and connects to the motherboard.

    • Lift up the connector by pulling it up with your fingernail. The ribbon will then be released and you can detach it.

    Bewerken

  4. Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 3, afbeelding 1 van 2 Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 3, afbeelding 2 van 2

    • Detach the five colored wires that connect the battery to the motherboard.

    • Use two fingers and place one on either side of the white plastic encasing the wires.

    • Pull on this piece to release it from the motherboard.

    • Now the battery is detached from the motherboard.

    Bewerken

  5. Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 4, afbeelding 1 van 3 Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 4, afbeelding 2 van 3 Insignia Flex 10.1 NS-P10A7100 Battery Replacement: stap 4, afbeelding 3 van 3

    • The battery is now only connected to the device by the glue on the bottom.

    • Use the iFixit opening tool to wedge the battery off of the device. You will have to use some force to pry the battery off of the device.

    • Now that your battery is removed it is ready for replacement.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 2 andere bijdragers

Hannah

Lid sinds: 02/05/19

289 Reputatie

1 Handleiding geschreven

Medailles: 4

+1 extra badge

Team

University of Michigan, Team S1-G3, Li Winter 2019 Lid van University of Michigan, Team S1-G3, Li Winter 2019

UMIC-LI-W19S1G3

4 Leden

1 handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 3

Afgelopen 30 dagen: 11

Altijd: 963