Repareer je spullen Gemeenschap Winkel

Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement

Inleiding

Rubber gaskets may wear out over time, preventing the lid from closing/opening properly. This guide will show you how to replace the rubber gasket.

  1. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement, Rubber Gasket: stap 1, afbeelding 1 van 1

    • Remove lid and place upside down on a flat surface.

    Bewerken

  3. Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: stap 2, afbeelding 1 van 2 Insignia 6-Quart Pressure Cooker Rubber Gasket Replacement: stap 2, afbeelding 2 van 2

    • Grab the edge of the clear rubber gasket and slowly peel it off the lid.

    • Continue peeling off the gasket until it is completely detached from the lid.

    Bewerken
Conclusie

To reassemble your device, follow these instructions in reverse order.

Auteur

met 3 andere bijdragers

Savannah Webb

Lid sinds: 01/18/18

657 Reputatie

5 handleidingen geschreven

Medailles: 7

+4 andere badges

Team

Cal Poly, Team S12-G3, Banghart Winter 2018 Lid van Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 Leden

5 handleidingen geschreven

3 opmerkingen

Am having trouble Turning the lid from Unlock to lock. The pin comes out in the back when I go to turn it from unlock to lock. Can you help me?

pclarkrob3 - Antwoord

I bought the insignia pressure cooker at a garage sale but, the rubber gasket smells bad. I’ve cleaned the entire cooker but, that gasket stinks like no other

Chuck Smith - Antwoord

I am having the same problem as the first comment by pclarkrob3 I am having trouble turning the lid from unlock to lock. These are really crappy instructions!!!! I have only used my pressure cooker twice so everything is still new.

Vivian Lang - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 12

Altijd: 1,190