Ga door naar hoofdinhoud

Insignia 6-Quart Pressure Cooker Float Valve Replacement

  1. Insignia 6-Quart Pressure Cooker Float Valve Replacement, Float Valve: stap 1, afbeelding 1 van 1
    • Remove the lid and place it upside-down on a flat surface.

  2. Insignia 6-Quart Pressure Cooker Float Valve Replacement: stap 2, afbeelding 1 van 1
    • Pinch the rubber gasket on the float valve and pull up.

  3. Insignia 6-Quart Pressure Cooker Float Valve Replacement: stap 3, afbeelding 1 van 2 Insignia 6-Quart Pressure Cooker Float Valve Replacement: stap 3, afbeelding 2 van 2
    • Pull the rubber gasket off of the metal rod.

    • The valve will fall out of its hole onto the table. It can now be cleaned or replaced.

    • You may find it helpful to push up on the float valve from the other side of the lid while you remove the gasket.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Savannah Webb

Lid sinds: 01/18/18

657 Reputatie

5 handleidingen geschreven

Team

Cal Poly, Team S12-G3, Banghart Winter 2018 Lid van Cal Poly, Team S12-G3, Banghart Winter 2018

CPSU-BANGHART-W18S12G3

4 Leden

5 handleidingen geschreven

2 opmerkingen

I received the replacement valve and pot. Now my insignia instapot won't hold pressure. It keeps seeping steam/spritz out of the float valve. I am ready to toss it in the trash. It worked bafore I replaced that stem. I should've kept it.

Carole Neider - Antwoord

OK after much digging, I found the old valve and now it is pressurizing.

Carole Neider - Antwoord

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 4

Afgelopen 7 dagen: 18

Afgelopen 30 dagen: 89

Altijd: 4,273