Ga door naar hoofdinhoud

Inleiding

Prereq only.

  1. The last section of riser main pipe will have the pump cylinder attached to the bottom.
    • The last section of riser main pipe will have the pump cylinder attached to the bottom.

    • Pull the assembly of riser main pipe and cylinder out of the well and set the assembly on a block of wood to keep the cylinder off the ground.

  2. Using two pipe wrenches, unscrew the cylinder from the riser main. Using two pipe wrenches, unscrew the cylinder from the riser main. Using two pipe wrenches, unscrew the cylinder from the riser main.
    • Using two pipe wrenches, unscrew the cylinder from the riser main.

  3. Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve. Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve.
    • Slowly pull the cylinder off of the pump rod, exposing the traveling valve and foot valve.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Lid sinds: 17-10-09

425.997 Reputatie

411 handleidingen geschreven

Team

iFixit Lid van iFixit

Community

104 Leden

9.254 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 9