Gereedschap

Onderdelen

Geen onderdelen nodig.

Flip the device over so the bottom is facing up.
  • Flip the device over so the bottom is facing up.

  • You will know it is the bottom because there will be six silver screws visible.

Voeg opmerking toe

Remove the USB converter device by gently pulling it out.
  • Remove the USB converter device by gently pulling it out.

  • Do not pull the converter device out by the cord.

Voeg opmerking toe

  • Remove the six silver screws using a small Phillips head screwdriver.

Voeg opmerking toe

  • Slide the bottom plastic panel of the shell down so it is free of the end cap and the top panel.

  • Lift panel free of device.

Voeg opmerking toe

  • Remove the plastic end cap by sliding it forward, freeing from the rest of the device.

  • You can identify the end cap by noting the label "SuperDisk Drive" above where you would insert a floppy disk.

Voeg opmerking toe

  • Slide the metal housing out of the plastic shell.

Voeg opmerking toe

  • Slide metal panel out of the metal casing.

Voeg opmerking toe

  • Slide disk drive out of metal casing.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Ryan

Lid sinds: 13-02-14

1 Reputatie

1 Handleiding geschreven

Team

Ohio State, Team 1-2, Buehl Spring 2014 Lid van Ohio State, Team 1-2, Buehl Spring 2014

OSU-BUEHL-S14S1G2

4 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 211