Gereedschap

Geen gereedschap nodig.

Onderdelen

Geen onderdelen nodig.

  1. Turn over the Delphi MyFi XM2GO Device on its back to start the cover-removal process.
    • Turn over the Delphi MyFi XM2GO Device on its back to start the cover-removal process.

    Voeg opmerking toe

  2. Locate the large button on the top back of the device.
    • Locate the large button on the top back of the device.

    • Press this button at the top while making a firm grip on the battery cover.

    • As the button is pressed, move the cover towards the bottom of the device.

    • The battery removal tab may pop up during the cover removal process.

    Voeg opmerking toe

  3. Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    Verspreid de kerstsfeer
    Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
    • Holding the device, grab the tab with thumb and index figure.

    • Pull down on the tab to move the battery block a few millimeters towards the bottom of the device to unlock the latch at the top.

    • After the latch at the top is disengaged, pivot the battery away from the back and the battery will be free.

    Voeg opmerking toe

    • After removing the battery cover and battery, the device information is located near the battery connections highlighted in red.

    Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

Scott Byer

Lid sinds: 09-03-12

61 Reputatie

5 handleidingen geschreven

Team

Clemson, Team 1-2, Benson Spring 2012 Lid van Clemson, Team 1-2, Benson Spring 2012

CLEM-BENSON-S12S1G2

3 Leden

9 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 1

Afgelopen 30 Dagen: 1

Altijd: 1,298