Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Inleiding

This guide will show you how to replace your hard drive disk. Several reasons why you would want to replace your hard drive is because you want to increase your memory or it is faulty or broken.

  1. Flip the laptop over and find the battery latch. Flip the laptop over and find the battery latch. Flip the laptop over and find the battery latch.
    • Flip the laptop over and find the battery latch.

  2. Move the latch to the side with the unlocked symbol.
    • Move the latch to the side with the unlocked symbol.

  3. Pry the battery out using your fingers. Pry the battery out using your fingers. Pry the battery out using your fingers.
    • Pry the battery out using your fingers.

  4. LCD iPhone-scherm fixkits

    De goedkope optie, ondersteund door onze levenslange garantie.

    Koop kits

    LCD iPhone-scherm fixkits

    Bespaar op reparatiekosten, niet op kwaliteit.

    Koop kits
  5. Put on the anti-static wrist trap and clip it to a large metal object.
    • Put on the anti-static wrist trap and clip it to a large metal object.

    • If you do not have an anti-static wristband, make sure to touch a large metal object to ground yourself before beginning to work on your replacement. Occasionally touch the metal object.

  6. Using a coin, remove the coin screw by turning counterclockwise. It's best to use a thicker coin, such as a nickel. It's best to use a thicker coin, such as a nickel.
    • Using a coin, remove the coin screw by turning counterclockwise.

    • It's best to use a thicker coin, such as a nickel.

  7. Using a plastic spudger, pry off the plastic cover by pulling it out.
    • Using a plastic spudger, pry off the plastic cover by pulling it out.

  8. Utilizing your fingers, untuck the tab and pull to remove the hard drive. Utilizing your fingers, untuck the tab and pull to remove the hard drive. Utilizing your fingers, untuck the tab and pull to remove the hard drive.
    • Utilizing your fingers, untuck the tab and pull to remove the hard drive.

  9. Using a screwdriver, remove the screws by turning them counterclockwise to remove the bracket. four 3mm PH0 screws The metal bracket is still attached with a weak adhesive tape, gently pry it off with a spudger.
    • Using a screwdriver, remove the screws by turning them counterclockwise to remove the bracket.

    • four 3mm PH0 screws

    • The metal bracket is still attached with a weak adhesive tape, gently pry it off with a spudger.

  10. The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger. The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger.
    • The top plastic piece is adhered with a weak adhesive. Gently pry it off with a spudger.

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Kevin Nguyen

Lid sinds: 04-10-16

626 Reputatie

4 handleidingen geschreven

Team

USF Tampa, Team 1-4, Nance Fall 2016 Lid van USF Tampa, Team 1-4, Nance Fall 2016

USFT-NANCE-F16S1G4

4 Leden

10 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 8

Afgelopen 30 dagen: 32

Altijd: 1,245