Take off the back covering of the phone along with the battery and SIM card. The SIM card is located above the battery.
  • Take off the back covering of the phone along with the battery and SIM card.

  • The SIM card is located above the battery.

Voeg opmerking toe

Using the Phillips #00 Screwdriver, take out the four small screws located at the four corners of the phone. Save the screws. They will be needed for reassembly.
  • Using the Phillips #00 Screwdriver, take out the four small screws located at the four corners of the phone.

  • Save the screws. They will be needed for reassembly.

Voeg opmerking toe

Using the same screwdriver, take out the two bigger screws located on each side of the battery compartment.
  • Using the same screwdriver, take out the two bigger screws located on each side of the battery compartment.

  • NOTE: Save the screws. They will be needed for reassembly.

Voeg opmerking toe

Once all the screws are removed, use the iPod opening tool to pry off the back covering of the phone along the edge of the back cover and you will have access to the motherboard.
  • Once all the screws are removed, use the iPod opening tool to pry off the back covering of the phone along the edge of the back cover and you will have access to the motherboard.

  • Note: The power and volume buttons will fall out of the phone. Set aside for reassembly.

Voeg opmerking toe

Carefully pull the backing of the phone from the motherboard with your hands.
  • Carefully pull the backing of the phone from the motherboard with your hands.

Voeg opmerking toe

To remove front encasing from the motherboard, first pull back the orange tabs. To remove front encasing from the motherboard, first pull back the orange tabs.
  • To remove front encasing from the motherboard, first pull back the orange tabs.

Voeg opmerking toe

Once the orange tabs are pulled back, carefully pull the motherboard apart from the front casing. Once the orange tabs are pulled back, carefully pull the motherboard apart from the front casing.
  • Once the orange tabs are pulled back, carefully pull the motherboard apart from the front casing.

Voeg opmerking toe

The camera is not removable from the motherboard. Therefore, a new motherboard must be purchased in order to replace the camera.
  • The camera is not removable from the motherboard. Therefore, a new motherboard must be purchased in order to replace the camera.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

2 andere personen hebben deze handleiding voltooid.

Marcus Mamarella

Lid sinds: 13-02-14

36 reputatie

1 Handleiding geschreven

Team

Ohio State, Team 1-1, Meza Spring 2014 Lid van Ohio State, Team 1-1, Meza Spring 2014

OSU-MEZA-S14S1G1

4 Leden

3 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 6

Afgelopen 30 Dagen: 6

Altijd: 390