Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

In this guide we are going to replace the charging report on the Huawei ascend Y300 android smartphone. Before starting, it is a good idea to prepare an organized area to carry out the repair. It is also helpful to have a way of containing loose screws so they do not become lost.

Onderdelen

Geen onderdelen opgegeven.

  1. Remove the back panel. Remove the back panel.
    • Remove the back panel.

  2. Remove the battery.
    • Remove the battery.

  3. De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu

    De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu
  4. Use a T4 Torx screwdriver to remove the eight screws.
    • Use a T4 Torx screwdriver to remove the eight screws.

  5. Pry the screen from the  frame by utilizing a wedge. Avoid scratching the case.
    • Pry the screen from the frame by utilizing a wedge.

    • Avoid scratching the case.

  6. Use the tweezers to remove the vibrator from the device. Use the tweezers to remove the vibrator from the device.
    • Use the tweezers to remove the vibrator from the device.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Cordell

Lid sinds: 02-04-19

121 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S3-G5, Harley Spring 2019 Lid van IUPUI, Team S3-G5, Harley Spring 2019

IUPUI-HARLEY-S19S3G5

3 Leden

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 2

Altijd: 85