Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Inleiding

In this guide we are going to replace the charging report on the Huawei ascend Y300 android smartphone. Before starting, it is a good idea to prepare an organized area to carry out the repair. It is also helpful to have a way of containing loose screws so they do not become lost. In addition, his guide requires soldering, a “How To” guide is included.

  1. Remove the back plate by hand. There is a small indent on the bottom of the phone to pry open. Remove the back plate by hand. There is a small indent on the bottom of the phone to pry open.
    • Remove the back plate by hand. There is a small indent on the bottom of the phone to pry open.

  2. Lift up and remove the battery.
    • Lift up and remove the battery.

  3. De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu

    De essentiële toolkit

    De meest behulpzame tools in onze meest compacte kit.

    Koop nu
  4. Use a T4 Torx screwdriver to remove the 8 screws along the outer edge of the case. Use a T4 Torx screwdriver to remove the 8 screws along the outer edge of the case.
    • Use a T4 Torx screwdriver to remove the 8 screws along the outer edge of the case.

  5. Using the plastic opening tool, pry the screen from the casing. Insert the tool between the case and screen to pry the pieces apart. Take care to not damage the screen or case.
    • Using the plastic opening tool, pry the screen from the casing. Insert the tool between the case and screen to pry the pieces apart.

    • Take care to not damage the screen or case.

  6. Use a soldering iron to desolder the four connections to the charging port. For information regarding how to properly solder, click the following link. How To Solder and Desolder Connections.
    • Use a soldering iron to desolder the four connections to the charging port.

    • For information regarding how to properly solder, click the following link. How To Solder and Desolder Connections.

Conclusie

To reassemble your device, follow these instructions in reverse order.

Alec Schory

Lid sinds: 02-04-19

121 Reputatie

1 Handleiding geschreven

Team

IUPUI, Team S3-G5, Harley Spring 2019 Lid van IUPUI, Team S3-G5, Harley Spring 2019

IUPUI-HARLEY-S19S3G5

3 Leden

2 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 2

Afgelopen 30 dagen: 12

Altijd: 440