Ga door naar hoofdinhoud

Inleiding

A backpack often has to take a lot when you are on the road. Due to frequent use, the conector may break and need to be replaced. Here we show you how to replace a broken conector with a new one and how to get your backpack ready for use again!

Gereedschap

Geen gereedschap opgegeven.

Onderdelen

  1. Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first! Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!
    • Please note: For better visibility in these instructions, we used an Aeroflex frame detached from the backpack. You don’t have to remove the frame of your backpack first!

  2. First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.
    • First press the frame into one side of the conector. Note: The wire frame must be on top of the conector.

    • Important: It must click!

  3. Then press the wire frame into the other side. Important: It must click! Important: It must click!
    • Then press the wire frame into the other side.

    • Important: It must click!

Conclusie

Finished! You did it.

Met dank aan deze vertalers:

de en

75%

Daniel Schmid helpt ons de wereld te herstellen! Wil je bijdragen?
Begin met vertalen ›

Daniel Schmid

Lid sinds: 22-02-16

327 Reputatie

13 handleidingen geschreven

Team

Vaudesport Lid van Vaudesport

Community

3 Leden

92 handleidingen geschreven

0 Opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 3

Altijd: 123