Inleiding

The filter on the Dyson DC14 vacuum needs to be cleaned every six months in order to maintain its peak operating condition.

Gereedschap

Geen gereedschap nodig.

Onderdelen

The filter is located in the canister of your vacuum.
  • The filter is located in the canister of your vacuum.

Voeg opmerking toe

Open the canister filter compartment.  Push the clip upwards, and open the canister top away from you.
  • Open the canister filter compartment. Push the clip upwards, and open the canister top away from you.

  • Remove the yellow filter housing.

Voeg opmerking toe

  • Remove the blue sponge-filter from the yellow filter housing.

    • The filter and housing must both be completely dry before reinstalling. Do not use your vacuum without filters installed.

  • Clean the blue sponge-filter in cold water until the water runs clear.

Voeg opmerking toe

Conclusie

Once the filter is cleaned, set the blue filter sponge and the yellow filter housing aside for at least 24 hours to dry. Do not use your vacuum without a filter, or when the filter is still wet. To reassemble, follow the steps in reverse order.

8 andere personen hebben deze handleiding voltooid.

Donald Percivalle

Lid sinds: 03-10-12

1.162 Reputatie

4 handleidingen geschreven

Team

Cal Poly, Team 3-22, Amido Fall 2012 Lid van Cal Poly, Team 3-22, Amido Fall 2012

CPSU-AMIDO-F12S3G22

4 Leden

6 handleidingen geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 15

Afgelopen 7 Dagen: 126

Afgelopen 30 Dagen: 478

Altijd: 21,416