Ga door naar hoofdinhoud

How to put an iPod Classic into Debug mode

  1. How to put an iPod Classic into Debug mode, Rebooting your iPod: stap 1, afbeelding 1 van 3 How to put an iPod Classic into Debug mode, Rebooting your iPod: stap 1, afbeelding 2 van 3 How to put an iPod Classic into Debug mode, Rebooting your iPod: stap 1, afbeelding 3 van 3
    • Press down on the Center and Menu buttons until the iPod restarts.

    • If your iPod is dead, plug it in and make sure the Hold Switch located on top of the device is in the unlocked position.

    • When you do this, it's important to restart into the iPod's default OS.

  2. How to put an iPod Classic into Debug mode, Accessing Debug mode: stap 2, afbeelding 1 van 1
    • Hold down the Previous Track and Center buttons.

    • The screen should display the Apple logo. Once the screen turns white, it is safe to release the two buttons.

  3. How to put an iPod Classic into Debug mode, Navigation of the Debug Menu: stap 3, afbeelding 1 van 1
    • Navigation of the Menu will help out with using the iPod to figure out it's problem.

    • Press Menu to return to the previous screen, or the next screen in some cases.

    • The Centre button executes the function currently selected.

    • Skip Track and Previous Track buttons are used to scroll through the lines.

Eindstreep

4 andere personen hebben deze handleiding voltooid.

Jayden Montes

Lid sinds: 08/29/20

292 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 16

Afgelopen 7 dagen: 77

Afgelopen 30 dagen: 299

Altijd: 3,933