How to fix GEN 2 Wheelchair squeaky parts

Deze handleiding heeft recentere wijzigingen. Schakel over naar de nieuwste niet-geverifieerde versie.

Inleiding

This guide will show how to fix squeaky parts on the wheelchair.

Wat je nodig hebt

Stap 1 How to fix GEN 2 Wheelchair squeaky parts

How to fix GEN 2 Wheelchair squeaky parts, How to fix GEN 2 Wheelchair squeaky parts: stap 1, afbeelding 1 van 3

How to fix GEN 2 Wheelchair squeaky parts, How to fix GEN 2 Wheelchair squeaky parts: stap 1, afbeelding 2 van 3

How to fix GEN 2 Wheelchair squeaky parts, How to fix GEN 2 Wheelchair squeaky parts: stap 1, afbeelding 3 van 3

Locate the source of the squeaking.
Typically, this will be one of the rear wheels, castor wheels, or brakes.
Clean and remove any dirt or rust from the source of the squeaking.
You may need to partially disassemble the squeaky part in order to thoroughly clean it.

Vertaal

Stap 2

Check for improper assembly.
Refer to the teardown to check that the wheelchair is properly assembled.
Check for proper lubrication. If not lubricated, lubricate thoroughly with bike grease.

Vertaal

Stap 3

Roll the wheelchair around to check if the squeaking has stopped.
If the squeaking still continues, recheck the chair until the problem is fixed.

Vertaal

Conclusie

Squeaking can be caused by overly tightened connections. If problem still occurs after going through steps, try to slightly loosen bolts (half a turn of the wrench) near the source of squeaking.

Één andere persoon heeft deze handleiding voltooid.