Inleiding
Creating a Tails live USB is a straightforward process that allows you to use Tails OS on any computer without installing it. By creating a Tails Live USB you can use the privacy-focused Tails OS on any computer without leaving traces.
Materials
- A USB flash drive with at least 8GB capacity (Ideally with USB 3.0 Speed)
- A computer with an internet connection
Wat je nodig hebt
-
-
Open your web browser and visit the official Tails OS USB Downloads Page, and download the ISO file
-
-
-
Visit the BalenaEtcher website and download the Etcher software.
-
-
-
Insert the USB flash drive into an available USB port on your computer and launch Etcher.
-
-
-
-
In Etcher, click "Flash from file" and select the Tails ISO image you downloaded earlier.
-
Select the USB flash drive as the target device.
-
Click "Flash!" to start the process. Etcher will copy the Tails OS to the USB drive.
-
-
-
Once the flashing process is complete, safely eject the USB drive from your computer.
-
-
-
Insert the Tails live USB into the computer you want to use.
-
Restart the computer and enter the boot menu by pressing the appropriate key during startup (usually F2, F12, or Delete).
-
Select the USB drive as the boot device from the boot menu.
-
Tails will start, and you'll be presented with the Tails Greeter screen.
-
-
-
Follow the on-screen instructions to configure language, keyboard, and other settings.
-
Creating a Tails live USB using this iFixit guide provides you with a secure and private way to use Tails OS on any computer without leaving traces. Remember to always use Tails responsibly and respect the privacy and security it offers.
Creating a Tails live USB using this iFixit guide provides you with a secure and private way to use Tails OS on any computer without leaving traces. Remember to always use Tails responsibly and respect the privacy and security it offers.
Annuleren: ik heb deze handleiding niet afgemaakt.
4 andere personen hebben deze handleiding voltooid.
