Inleiding

This guide will explain how to do simple maintenance on your Avanti 308YWT evaporator tray. This involves simply removing and cleaning the tray. If the evaporator tray is not cleaned it could cause the fridge to start leaking, which could eventually damage the floor.

Before starting, unplug the refrigerator.
  • Before starting, unplug the refrigerator.

Voeg opmerking toe

Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.
  • Go to the bottom of the back side of the refrigerator and locate the cut out where the compressor and evaporator are stored.

Voeg opmerking toe

  • Remove the evaporator tray by simply pulling up and out the tray. make sure that none of the liquid spills.

Voeg opmerking toe

  • The evaporator tray might have ice build up on it. You can remove this ice by pouring warm water on the tray. After the ice is melted, clean the tray with warm water and soap.

Voeg opmerking toe

  • Dry and reinsert the tray.

Voeg opmerking toe

  • Plug the refrigerator back in.

Voeg opmerking toe

Conclusie

To reassemble your device, follow these instructions in reverse order.

6 andere personen hebben deze handleiding voltooid.

Seye

Lid sinds: 11-10-14

344 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 1-38, Donnelly Fall 2014 Lid van USF Tampa, Team 1-38, Donnelly Fall 2014

USFT-DONNELLY-F14S1G38

1 Lid

1 handleiding geschreven

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 Uren: 1

Afgelopen 7 Dagen: 4

Afgelopen 30 Dagen: 13

Altijd: 981