Ga door naar hoofdinhoud

How to change the oil and replace the oil filter in a Suzuki DR650 SE

Gearchiveerde handleiding
Deze handleiding wordt enkel nog bijgehouden voor historische doeleinden. Gebruik de laatste versie van deze gids om uw reparatie uit te voeren.

Wat je nodig hebt

    • Remove oil drain plug and let all oil drain from the engine. Now remove oil filter cover and take out the old filter.

    • Clean out the oil filter reservoir and put in the new oil filter. Replace the filter cover and screw back on tightly. Also replace the oil drain plug.

    • Remove the oil cap and use your funnel to pour in the oil. Watch the glass oil fill level to see how much has been put in. Once full, put the oil cap back on. (2.5 quarts with oil filter, 2.4 w/o filter.)

    • Now that everything is replaced, start the bike up to make sure you have no leaks and see that everything is running smoothly.

Conclusie

Detailed guide pictures will be added later. Until then, here is a video guide: http://www.youtube.com/watch?v=GHj3GjUlx...

2 andere personen hebben deze handleiding voltooid.

Ryan

Lid sinds: 10/11/14

161 Reputatie

1 Handleiding geschreven

Team

USF Tampa, Team 1-18, Donnelly Fall 2014 Lid van USF Tampa, Team 1-18, Donnelly Fall 2014

USFT-DONNELLY-F14S1G18

1 Lid

1 handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 1

Afgelopen 7 dagen: 1

Afgelopen 30 dagen: 2

Altijd: 196