Ga door naar hoofdinhoud

How to Restore An Expo Marker

Wat je nodig hebt

  1. How to Restore  An Expo Marker, How to Restore  An Expo Marker: stap 1, afbeelding 1 van 1
    • Collect all of the markers you want to restore.

    • Obtain isopropyl alcohol (rubbing alcohol) or vinegar.

  2. How to Restore  An Expo Marker: stap 2, afbeelding 1 van 1
    • Pour a small amount of either alcohol or vinegar into a small bowl, using enough to cover the tip of the markers.

    • Soak the tip of the markers in the alcohol or vinegar until the ink comes out of the tip of the marker.

    • In some cases, you will see the ink of the marker swirl out.

  3. How to Restore  An Expo Marker: stap 3, afbeelding 1 van 2 How to Restore  An Expo Marker: stap 3, afbeelding 2 van 2
    • Place the cap back on the marker.

    • Let the marker sit tip side up for at least 24 hours. The alcohol should penetrate inside the tip of the marker.

  4. How to Restore  An Expo Marker: stap 4, afbeelding 1 van 1
    • Your marker should be good to go.

    • If your marker is not functioning properly, it may be a sign that your marker dried out completely.

Conclusie

To reassemble your device, follow these instructions in reverse order.

3 andere personen hebben deze handleiding voltooid.

Alexus A Carpenter

Lid sinds: 09/23/21

154 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 37

Afgelopen 7 dagen: 239

Afgelopen 30 dagen: 1,282

Altijd: 37,048