Ga door naar hoofdinhoud

How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass

Wat je nodig hebt

  1. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass, Tuning Key: stap 1, afbeelding 1 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass, Tuning Key: stap 1, afbeelding 2 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass, Tuning Key: stap 1, afbeelding 3 van 3
    • Turn the tuning key counter-clockwise to the loosen string.

    • Only loosen the turning key(s) that need to be replaced.

    • Continue turning until there is slack in the string.

  2. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 2, afbeelding 1 van 2 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 2, afbeelding 2 van 2
    • Cut the desired string with needle nose pliers.

    • Make sure the string has slack before cutting.

    • Remove the string by threading out through the bottom of the bass.

  3. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 3, afbeelding 1 van 2 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 3, afbeelding 2 van 2
    • Use a Phillips #1 screwdriver to remove the four 9.53 mm screws.

    • Remove the broken tuning key.

  4. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 4, afbeelding 1 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 4, afbeelding 2 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 4, afbeelding 3 van 3
    • Adjust the direction of the replacement tuning key as need.

    • Line up the screw holes of the tuning key to the existing drill holes on the bass.

  5. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 5, afbeelding 1 van 2 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 5, afbeelding 2 van 2
    • Note the length of the tuning key securing screws to estimate the drill depth needed to drill into the headstock.

    • Drill new placement holes into the headstock using a 1/16" drill bit.

    • Drill in a level environment and be aware of surroundings.

    • Drill the holes straight down and centered with the tuning key screw holes.

  6. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 6, afbeelding 1 van 2 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 6, afbeelding 2 van 2
    • Secure the four 9.58 mm screws using a drill with the Phillips #2 screwdriver bit.

    • Make sure the drill is not held at an angle to prevent the screws from stripping.

  7. How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 7, afbeelding 1 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 7, afbeelding 2 van 3 How to Replace a Tuning Key on a Sterling by Music Man StingRay Ray4HH Electric Bass: stap 7, afbeelding 3 van 3
    • Thread the string through the bottom of the bass to the new tuning key.

    • Loop the string around the tuning peg-three to four times-until tight.

    • Check for tension in the string.

    • Adjust the tuning key as needed.

Conclusie

This guide will work for any of the tuning keys on a Sterling by Music Man StingRay.

Darby Eime

Lid sinds: 02/13/23

145 Reputatie

1 Handleiding geschreven

0 opmerkingen

Voeg opmerking toe

Weergavestatistieken:

Afgelopen 24 uren: 2

Afgelopen 7 dagen: 5

Afgelopen 30 dagen: 25

Altijd: 284